SDL 01 - Review of physiological concepts
Physiology of Muscle contraction
Muscle is assembly of contractile + elastic elements.
Each crossbridge generate force > tendon > move bone
Inital length of muscle cell (preload)
Actin are firmly anchored at the ends by Z disks. Myosin tugging on thin filaments draws the Z disks closer together > shortening it > muscle contraction
Skeletal muscles rests at a length optimal for crossbridging - cardiac muscles rests at point less than this > increasing preload (stretching) > increase force (Starling’s law)
Overview of CVS
List the main functions of cardiovascular system
The main function is transport - heat, water and electrolytes between the blood and external environment. It transports:
O2 and CO2 from lungs to all cells
Metabolic waste from all cells to the kidneys
Nutrients and water
Metabolic processing to liver
Immune cells and antibodies
hormones
Describe the arrangement of CVS
Pulomonary artery carries blood away from the heart, pulonary vein carries towards it
Output of the RV into pulmonary circulation = the output of LV into systemic circulation
Vascular beds are in parellel arrangement > all receive blood with same level of oxygen (~13kpa)
Name the 2 main phases of cardiac cycle
Systole - period of contraction and ejection (in both RV & LV).
Diastole - period of relaxation and filling (60% of cardiac cycle)
> Pressure in the aorta is higher during systole, during diastole pressure is maintained by elastic recoil.
> Pulse pressure = diastolic BP - systolic
> Mean arterial pressure = [(SP-DP)/3] +DP
Blood coming back to right heart is at very low pressure (0mmHg) > goes to lung (25 mmHg) then goes to LV > aorta at an increased pressure (90mmHg)
Define cardiac output and how to calculate it?
Cardiac Output (CO) is the volume of blood pumped/min. On average this is 5-6L/min.
CO = Stroke volume (70ml) x Heart rate (70bpm)
SV - Volume ejected per contraction (ml)
HR - Rate at which your heart beats (b/min)
-> Left CO = right CO
What determines the pressure in the arterial system?
As blood move through systemic circulation, pressure falls
it remains pulsatile in arteries & arterioles (greatest resistance > pressure drop) then it gets continuous & drops when it get to capillaries > venules > veins
Pressure in arterial system is determined by:
Resistance to blood flow
Blood volume in arterial system
Pressure = flow (cardiac output from LV) x resistance (e.g HTN)
Arterial BP = CO x total peripheral resistance (TPR)
TPR (systemic vascular resistance - SVR) is the resistance to flow offered by all systemic vasculature (except pulmonary)
Arterioles can change resistance by vasoconstriction (increases TPR > less flow) or vasodilation (decreases TPR > increase flow)
Resistance is controlled by many factors - nerves, local factors & hormones
Pulse pressure = SP - DP
Mean arterial BP = [(SP-DP)/3]+DP —> [(120-80)/3] + 80 = 93mHg
Learn the differences between veins and arteries
Electrical activity of the heart
• Describe the cardiac electrical conduction system
• Identify the currents underlying the shape of the SA node action potential
• Assess how autonomic nerves modify SAN activity & HR
• Identify the currents underlying the shape of the ventricular action potential
• Discuss & evaluate factors controlling cardiac conduction velocity and refractoriness
What does the ECG measures and what does each waves means?
Measures electrical activity of the heart
Monitors extracellular field potential between 2 electrodes
Represents the sum of depolarisation & repolarisation potential from all cardiac myocytes.
P wave - atrial depolarisation
QRS complex - ventricular depolarisation
T wave - ventricular repolarisation
R-R interval - used to calculate HR & ? irregular rhythms
P-R interval - time from begining of atrial depolarisation > initiation of ventricular depolarisation. ?AVN delay
QRS duration - total time of ventricular depolarisation. Helps to ? ventricular conduction issues
QT interval - time from start of ventricular depolarisation to end of ventricular repolarisation. Help to ?prolongation of vetricular APs.
Describe the cardiac conduction system
This system allows AP to travel through the heart
SA node is the pacemaker - located at RA wall, where firing of spontanous APs begins
AP spread throughout B/L atria > down to AV node - located at base of RA
AP then conducted through Bundles of His > Purkinje fibres > spread from ventricular endocardium (inner) > epicardium (outer layer)
Which cells of the heart is able to generate spontanous AP and which cells cant?
The cells of the heart differ in their ability to generate spontaneous APs.
SAN and AVN myocytes can produce spontaneous APs
Purkinje fibre cells have very slow spontaneous AP generation
Atrial and ventricular cardiac myocytes cannot generate spontaneous APs.
-> SAN cells: highest rate of spontaneous AP generation (80-100/min) = drives the HR in healthy person
-> AVN cells: slower rate of spontaneous AP generation (40-60/min)
-> Purkinje fibres: slowest rate of spontaneous AP generation (20-40/min)
Which cell of the heart generates fastest AP, hence the pacemaker?
Sinoatrial Node
Fires spontanous APs at frequency of 80-100/min
Fastest of all cells = dictates HR = is the pacemaker
Has no resting membrane potential as the MP of these cells are always drifting upwards towards the threshold > continous increase in potential (the pacemaker potential).
SA node PMP starts at -60mV > becomes slowly more +ve > once reach threshold value > rapid depolarisation - MP peaks at +10mV.
Rapid repolarisation follows back to -60mV
Which ions are responsible for pacemaker potential?
During pacemaker potential:
Inward movement of Na+ via HCN channels (If)
Inward movement of Ca2+ through T-type Ca channels
Outward movement of K+ (low conductance)
Overall, rate of Na+ & Ca2+ influx exceeds K+ efflux > MP raises towards threshold.
During depolarisation & repolarisation:
Once threshold reached, L-type voltage gated Ca2+ channels open > rapid influx of Ca2+ > rapid depolarisation
AP peaks at 10mV, voltage gated Ca2+ channel start to close > opening of voltage gated K+ channels > K+ efflux
This causes MP to fall back to -60mV = repolarisation phase
Note: HCN = hyperpolarisation-activated cyclic nucleotide-gated
Describe the autonomic innervation of SA node
SA node is innervatd by ANS:
Parasympathetic neurones carried in the vagus nerve (CNX), release acetylcholine (ACh), acting to slow HR
Sympathetic neurones carried in the cardiac sympathetic nerves, release noradrenaline (NA), acting to increase HR
-> The intrinsic rate of the SAN is 80-100 AP/min, however the heart rate is 60-70 bpm. This is due to constant vagal tone which slows down our heart rate.
How does parasympathetic activity controls HR?
Occurs by altering the slope of PM potential in SA node:
Increased parasympathetic activity (vagal):
ACh is released > acts on M2 ACh receptors expressed on SAN cells
This increases K+ efflux which reduces slope of pacemaker potential
This means it takes longer to get to threshold, therefore decreasing frequency of APs, decreasing heart rate
This is called a negative chronotropic effect
How does sympathetic activity controls HR?
Increased sympathetic activity
NA is released > binds to B1 adrenoreceptors on SAN cells
This causes increase in Na+ and Ca2+ influx, elevating slope of pacemaker potential
This means threshold is reached faster, increasing the frequency of APs, increasing heart rate
Where adrenaline is circulating in the blood, this can also have the same effect on B1 adrenoreceptors.
What is AV delay and what is its significance?
AVN is found at base of RA - capable of spontanous AP but the pacemaker potential is less steep = takes longer to reach threshold > slower rate of AP (40-60/min)
Electrical conduction is slowest through the AVN. > causes a delay in AP reaching the ventricles, called the AV delay.
AV delay is important as it ensures the atrial depolarised, contracted & ejected into the ventricles, before ventricle contraction occurs.
Describe the phases of ventricular myocyte AP
-> Ventricular myocytes have no pacemaker potential - instead have a stable resting MP (-80 to -90mV).
-> Stimulated by APs from AVN > AP and contraction. They do not fire their own APs = Do not contract spontanously
Phase 0: Rapid depolarisation
From -80mV to +20mV due to inward movement of Na+ through fast voltage gated Na+ channels
Phase 1: Partial repolarisation
Na+ channels inactivate
Opening of fast voltage gated K+ channels > to partial repolarisation
Phase 2: Plateau
Voltage gated Ca2+ channels open > calcium influx
K+ efflux continues & equals Ca2+ influx > No change in overall membrane potential causing a plateau
Phase 3: terminal repolarisation
Delayed rectifier voltage gated K+ channels open > greater K+ efflux, allowing for repolarisation down to resting membrane potential
Phase 4: Reached resting membrane potential
What is refractory period? Absolute vs relative
Refractory period = time from initial depolarisation of the 1st action potential to the point at which 2nd AP can be stimulated.
Absolute refractory period: Period of time where a new AP cannot be generated at all.
This is the depolarisation and plateau phases.
Relative refractory period: an action potential can be stimulated in some cases (e.g. stronger stimulus).
During the terminal repolarisation phase until membrane potential returns to the resting value
What determines the refractory period?
RP is determined by number of available & recovered (re-prime) volage gated Na+ channels.
Length of RP under different conditions can be examined using 2 pulse protocol -
Voltage gated Na+ channels stimulated & current generated = P1
If these channels stimulated again too quickly, the 2nd current generated (P2) is smaller in magnitide than 1st one - due to insufficient amount of Na+ channel recoery.
But after sufficient time pass, new stimulus can generate current equal to the 1st one - because the RP has ended.
Na+ channels recover faster at more -ve MP. = sooner the MP return to resting potential, the faster the Na+ channels can recover = RP is also dependent on AP duration!
Shorter AP > shorter RP.
What is the function of gap junctions in cardiac myocytes?
Cardiac myocytes in atria & ventricles are connected (electrically coupled) through membrane proteins at gap junction > allows passive movement of +ve ions (Na+ & Ca2+) between neighbour cells when there is a charge gradient (ie different charges in 2 cells)
Transmission via gap junction is the reason why transmission is fast in the heart
AP in one cardiac myocyte (cell 1) > MP depolarise from -85mV > +20mV due to influx of Ca2+ & Na+
This creates charge gradient between this cell & neighbouring resting cell (at -85mV) > flow of Na+ & Ca2+ ions through gap junction into cell 2 > becomes more +ve
If this is enough to reach threshold potential of -60mV > AP in the cell 2 > opening of VG Na+ channels > continues to cell 3
Note: 1st pic, both cells at -ve RMP = no charge gradient = no movements of +ve ions. In the 2nd pic, cell one has +20mV charge > charge gradient so the +ve ions move down to cell 2
What factor determines the conduction velocity in the cardiac myocytes?
Main factor is magnitude of the charge gradient between cells - this depends on the amplitude of AP generated in cells (APA = AP amplitude)
Higher APA = faster conduction velocity
Normally, APA is ~ +20mV - his can vary in disease > arrythmia.
Other factor that influences CV is expression & function of gap junctions - less expression > lower conduction velocity.
Conduction velocity is slowest at AV node (not get mixed up with the ability to generate their own APs - in that case the Purkinjee is the slowest).
Patient with pheochromocytoma (adrenal tumour) presents with RR of 0.4s. What is the most useful type of acute Rx?
Beta-blocker
To calculate HR - 60s/RR = 60/0.4 = 150bpm = tachycardia
Pheochromocytoma > excess adrenaline > acts on B1 adrenoceptors on the SA node > increase the steepness of the pacemaker current > high HR.
Beta-blocker will reduce the steepness > reduce HR
Inherited mutation in the Tbx5 gene > malformation of cardiac conduction system including AVN & bundle of his. What will be seen on ECG?
PR and QRS prolongation
Malformarion of the AVN & bundle of his > slow conduction between atria & ventricles and through the ventricles
Slow AV conduction > prolonged PR.
Depending on the severity, some P waves may not be followed by QRS or complete loss of association between P & QRS complexes
A genetic mutation that reduces delayed rectifer K+ currents will do what to the ventricular APs?
Prolonged late (phase 3) repolarisation
Delayed rectified K+ channels are open during phase 3 > K+ efflux > the MP comes back to the resting potential
A loss of function / mutation of that channel > prolongs the repolarisaiton > longer AP > increase the risk of ectopic beats & ventricular arrythmia
hERG safety screening ensures that the the drugs dont affect these channels
This will present in ECG as lengthening of QT
T wave represents ventricular repolarisation
QT = time from start of ventricular depolarisation to end of ventricular repolarisation.
Prolonged ventricular repolarisation therefore leads to prolonged QT interval. So this mutation > long QT syndrome
Excessive blockade of cardiac L type Ca2+ channel is likley to do what?
Shortens the ventricular refractory period
The upstroke (amplitude) of the AP is usually determined by Na+ channels
During the plateau phase - influx of Ca2+ = efflux of K+ so no overal net change
Blockade of the L-type Ca2+ > reduced Ca2+ influx compared to K+ efflux > -ve MP is achieved earlier > faster return to RMP > shorter AP duration and faster Na+ channel recovery.
You prescribe a VG Na channel blocker to prolong the atrial refractory period, but what must you watch out for?
Ventricular conduction slowing
Na channel blocker > prolonged refractory period
Na channel controls the conduction velocity in the myocardiocytes - blocking the Na channel > reduce Na influx in phase 0 > reduce the depolarising current and reduce AP amplitude
E.g if Cell one is +20mV & cell 2 is -80mV the charge gradient > movement of ions through gap junction
If cell one is -10mV (due to blocked Na channel) and cell 2 is -80mV, the charge gradient is lower > slower spread of ions through gap junction so it takes longer for cell 2 to reach AP.
Note: the SA & AN node cells have no RMP and they usually have drifting potential towards the threshold - once it gets to the threshold, the Ca2+ cause the upstroke in the graph.
In the ventricular myocytes, which usually have RMP, its the Na+ chennels that cause the upstroke in the graph.
Cardiac Cycle
Patient is undergoing cardiac catheterisation to diagnose suspected abnormality.
QA: which part of the CVS is the catheter pressure transducer in if the pressure is regularly oscillating between ~6 and 30mmHg
QB: What is the role of isovolumetric contraction and relaxation phases of the cardiac cycle ?
QC: Why does majority of ventricular filling occur right at the beginning of the ventricular filling phase and why does this mean that at rest, pt with AF has no symptoms?
A: Right ventricle
RV has much less pressure - mainly due to the fact that if doesn’t need to generate high pressure as it is pumping blood only to pulmonary system which is much lower resistant system (PV pressure is ~20mmHg) . So its build less musculature.
LV on the other hand has much higher pressure as it need to pump blood agaist much higher systemic resistance.
B: The ventricle continue to contract untill it exceeds the pressure in the aorta causing the AV to open > blood pumped out into aorta. SO that the pressure in the LV can go up and down to allow valves to open and close
Isometric contraction > pressure go up to open AV valve
Isometric relaxation > pressure go down to allow MV to open
C: As ventricles relaxes and the pressure drops, the pressure in the atrium increases due to the venous return. Once the LV pressure goes below the the atrial pressure, the AV valve opens and the blood pours down to LV and at the end of the diastole, the atria contracts pushing last bit of the blood into the LV.
Some one with AF at rest, around 110ml of blood pours into LV at the initial stage then the atrial contraction pushes about 10ml more into LV. At rest this doesnt matter as the 110ml is adequate stroke vol.
However during exertion, the addition blood from atrial contraction does matter > symptomatic due to reduced SV.
Define cardiac cycle
Its the movement of blood out the heart into the great vessels due to the muscular activity of the heart.
Arterial BP (ABP) = Cardiac output x total peripheral resistance (TPR)
Cardiac output = stroke vol (SV) x heart rate (HR)
SV = vol of blood ejected from the ventricles. So if any of the other components affected, SV will be affected
Electrical activity > mechanical activity > pressure changes > volume changes = cardiac cycle
Pressure changes in the aorta and LV can be measured using cardiac catheter.
Echo can be used to assess volume and function of the heart
What are the phases of cardiac cycle? how long does each lasts at a normal resting heart rate?
-> At resting HR of 70bpm, each cardiac cycle lasts 850ms.
-> Split into 2 phases:
Diastole = ventricles relaxed > filling is mainly passive from atria.
Occupies 2/3rd of cardiac cycle (600ms)
When HR increases > duration of diastole is shortened
Systole = ventrical contraction > pressure generation > blood ejected out.
Occupies 1/3rd of the cardiac cycle (250ms)
Describe the basic principles of cardiac cycle
5 principles key to understanding the cardiac cycle:
Pressure (P) will increase in a chamber when the muscle around it contracts. Thicker & stronger muscle (LV) > increase pressure. Muscle relaxation > reduced pressure.
Valves will open when there is a pressure gradient across them.
Blood flows down a pressure gradient, from an area of high pressure to an area of lower pressure
When valves are open, pressures in neighbouring chambers change together
When valves are closed, pressures in neighbouring chambers can be different (change independently)
Describe what happens to chamber pressure and valves during ventricular diastole
Diastole = filling stage
Both atria and ventricles relaxed
Pressure in atria is > than ventricle > AV (mitral) valve open
Aortic valve closed aortic pressure is > ventricular pressure
Pulmonar vein pressure > atrial > ventricle = blood flow into LV
The flow is passive, not require any muscle contraction
Describe what happens to chamber pressure and valves during atrial systole
Atrial systole
Atria depolarises and contracts > increase atrial pressure
This contributes to ~5ml to ventricular filling (most of ventricular filling is passive)
Exercise > increase HR > more contribution from atria as it contracts harder.
Describe what happens during ventricular systole - explaining ventricular isovolumetric contraction
Ventricular systole (isovolumetric contraction)
Ventricular depolarisation > contraction > increase ventricular pressure.
When ventricular pressure exceeds atrial pressure, atrioventricular valves close
Aortic pressure is still higher than ventricular pressure so the AV remains closed
Ventricular blood vol does not change as both A-V valve & AV remains closed = isovolumetric contraction
Purpose of this phase is to raise the LV pressure (~80mmHg) to open AV
In HTN, the aortic pressure is very high > LV pressure will have to be higher (~110mmHg) to open AV
Describe what happens during ventricular systole - explaining ventricular ejection
After the Isovolumetric contraction phase, ventricles continue to contract > LV pressure exceeds the aortic pressure > opening of AV.
Blood ejected from LV to aorta with high momentum & velocity
This is important as half way through, the aortic pressure exceeds LV pressure but due to high momentum of blood, the AV remains open as blood as high energy than aorta so it moves down energy gradient.
During 2nd half of ejection phase, the force of LV contraction reduces > LV & aortic pressure also reduces
Describe what happens during ventricular systole - explaining ventricular isovolumetric relaxation
After the ventricular ejection, repolarisation > relaxation of the ventricular walls > reduced ventricular pressure
As LV relaxes, pressure falls below that of aortic pressure + energy of blood leaving falls > causing AV to close
The LV pressure still remains higher than atrial pressure so A-V valves remain closed.
As both AV & A-V valves closed, no change in LV volume = ventricular isovolumetric relaxation
-> When LV pressure drops below atrial pressure, the A-V valve opens and the cycle repeat again. (note that while A-V valve were shut, the blood already started pouring into atria, so when the A-V valve open, the ventricle get filled rapidly)
Learn the overview of the left cardiac cycle represented on this Wigger’s diagram
-> The X-axis represents time (~800ms/ resting cardiac cycle)
-> The Y-axis shows a number of different variables:
The line in green shows ECG trace. This gives the landmarks of the cardiac cycle as the electrical activity precedes the mechanical activity of the heart:
P-wave – atrial depolarisation > atrial contraction
QRS complex – ventricular depolarisation which precedes ventricular contraction
T-wave – ventricular repolarisation > ventricular relaxation.
The Y-axis as the top represents 3 different pressures
Aortic pressure – varies between 80-120 mmHg
Ventricular pressure – varies between 10-120 mmHg
Atrial pressure – varies between 0-10 mmHg (much lower)
The changes in these pressures are important for the filling and emptying of the ventricle, represented in purple as the Left Ventricular (LV) volume (ml) has a large amount of variation:
End diastolic volume ~ 120ml
End systolic volume ~ 50ml. = there is still blood left in the heart at the end of systole. This reserve of blood allows for stroke volume to be increased if necessary.
Difference between these two volumes = stroke volume (70ml).
At the bottom of the Y-axis,> heart sounds, These occur when the valves of the heart shut:
S1 – the closure of the AV valves (lub sound)
S2 – the closure of the SL valves (dub sound)
In which two places of the Wigger’s diagram can you see the ventricular diastole?
Can be seen at the beginning & at the end of each line
On the Right:
Mid-diastole (halfway filling) seen - atrial pressure (black) is > ventricular pressure (blue) = blood flow from atria to LV > LV vol increase (purple)
Aortic pressure (red) is much greater than LV pressure but is falling as blood moves into systemic circulation
Left side
Slight increase in atrial pressure due to depolarisation (P wave) & contraction. > simultanous pressure increase in neighbouring chamber (LV)
Atrial contraction > 5ml into LV (seen as tiny peak in the LV vol
Learn the changes on Wigger’s diagram during ventricular isovolumetric contration
QRS (1) = ventricular depolarisation
Leads to LV contraction > LV pressure rise - when it exceeds atrial pressure (2), MV shuts > S1 (3)
AV remains closed = ventricle is a closed chamber.
Rapid increase in pressure (4) with no vol change (5)
Isovolumetric contraction phase (6)
Small peak in atrial pressure as A-V valve pressing back into atria (7)
Diastolic pressure = lowest pressure in bloodstream during cardiac cycle immediately before AV opens (8)
Learn the changes on Wigger’s diagram during ventricular ejection
LV pressure exceeds aortic pressure (1 - blue line is above red line)
AV opens > increase pressure in aorta & LV increases > blood flow into aorta
LV vol falls as blood ejected out (2)
Mid ejection, aortic pressure exceeds LV pressure (3) - ejection continues due to blood energy gradient
End of ejection, aortic & LV pressure drops (4) > speed of ejection reduces > LV vol slopes (5)
Learn the changes on Wigger’s diagram during ventricular diastole - isovolumentric relaxation
T wave = ventricular repolarisation > relaxation (1)
As LV pressure drops below aortic pressure, AV closes generating 2nd HS S2 (2)
Both AV & A-V valve closed = closed system - LV pressure dropping (3) with no change in LV vol (4) = isovolumetric relaxation (5)
LV pressure drops below atrial pressure (6) > A-V valve opens > ventricullar filling commence
Atrial pressure steadily increases (6) during ejection & isovol relax as blood from pulmonary veins comes in
Learn the changes on Wigger’s diagram during ventricular diastole
LV pressure falls below atrial pressure (1)
A-V valve opens (2) > rapid ventricular filling cause increase in LV vol (3)
Cycle repeats again.
What are the normal timings of cardiac cycle and happens to the when HR increases?
Normal timings of cardiac cycle:
-> Systole lasts 250ms (remains stable even when HR rises)
Isovolumetric contraction = 50ms
Ejection = 200ms
-> Diastole lasts 600ms
Isovolumetric relaxation = 80ms
Filling = 520ms. - this is the only phase where changes occur e.g length decreases in tachycadia.
Atrial depolarisation occurs earlier (shifting P wave to L before ventricular filling is compromised
Rapid passive filling occurs early in filling phase - any issues during this can be compensated by stronger atrial contraction stimulated by increased sympathetic activity to atria (topping-up more than just 5ml blood)
Ventricular filling wont be affect unless HR >180
HR changes seen as reduced distance between T & next P wave.
What are the normal pressures in the heart chambers?
Right CO = Left CO to prevent blood accumulating in lungs & peripheral tissues
Pulomonary vasular resistance on the right heart is low while the systemic vascular resistance on the left is high
RV - as PVR is low, a lower pressure is needed to drive same CO + RV muscle doesn’t need to thick
LV - as TPR is high, higher pressure is needed to dive same CO + LV muscle is thicker
RA (0-4), RV (4-25), LA (0-8), LV (8-120), Pulm artery (10-25), aorta (80-120)
How are pressure and volume changes different between the left and right heart?
Qualitative changes in pressures are identical for L and R ventricule but the pulomanry, ventricular & atrial pressures are much lower on the right than left.
Histology workshop
What are the 3 histological layers of the heart and blood vessels?
The heart and the blood vessels are continuous. They share similar histology, they both consist of 3 layers:
Tunica Intima - innermost layer
Endocardium (epithelial lining of the heart)
Tunica Media - middle layer
Myocardium (heart muscle)
Tunica Externa (Adventitia) - outer layer
Epicardium (outer layer of the heart)
What is the correct histological classification of endothelium found in the tunica intima of the heart and blood vessels:
The endocardium includes the endothelium and subepithelial connective tissue.
The endothelium is a simple squamous epithelium
The subendothelial layer is deep to the endothelium, it is dense irregular connective tissue. It connects the endothelium to the myocardium
Describe the histological classification of Myocardium found in the tunica media
Myocardium consists of cardiac muscles which are:
Striated - can see myofibrils
Involuntary - myogenic under autonomic nervous system via SA node.
Cells are elongated & branched with central nuclei
Cells are tightly connected by intercalated discs which contains gap junctions, desmosomes & adhering junctions - together forms functional syncytium (= cells with multiple nuclei) and allows electrical & physical coupling
Skeletal muscles are an example of true syntium while cardiac musles are ‘functional syntium’
Cardiac & skeletal muscles differ in T-tubles:
Skeletal - ‘Triad’ = 1 T-tuble coupled to 2 SR
Cardiac - ‘Diad’ = 1 T-tuble coupled with 1 terminal cisterna of the sarcoplasmic reticulum
Describe the histology of Epicardium (Tunica externa / adventitia)
Epicardium is the outermost layer - also serves as innermost layer of pericardium (the serous visceral pericardium)
Epicardium is separated from serous parietal pericardium by pericardial cavity containing pericardial fluid
Its a collection of CT, contains many adipose cells + has blood vessels (CA) within it
Its outermost layer functions as serous visceral pericaridum - aka mesothelium (a simple squamous epithelium)
What structure does this histology belongs to?
Heart valve
Formed by folds of endocardium, covered both sides by endothelium
Enclosed within is Dense CT - this is fibroelastic to permit movement.
Infective endocarditis = infection of the valve > damage & clot formation which can travel & cause stroke
What makes up the fibrous cardiac skeleton?
There are 4 fibrous rings of dense irregular tissues with makes up fibrous core of the heart
The rings surround the aortic, pulomanary, left & right AV canals.
The rings separate the atria from ventricles & electrically insulate them allowing independent contraction - only exception is the opening through which fibres from AV conduction system pass.
The cardiac skeleton provides structural support & serves as attachment site for myocardium & heart valves.
Describe the histology of Purkinje fibres
Present in the sub-endocardial layer of the heart wall
Fibres are modified cardiac myocytes - specialised for electrical conduction rather than contraction
Stain differently to myocytes - have pale cytoplasm, larger than normal myocytes, have no intercalated discs, fewer myofibrils (mostly in the periphery of the cell) and possess more glycogen.
What are the 3 layers of blood vessel wall?
Structure varies throughout the body, but have common histological layers - 3 layers, continuous with that of the heart:
Tunica Intima - inner layer, composed of endothelium on a basement membrane lying over subendothelial CT layer
Tunica Media - middle muscular layer, has concentric layers of SM & elastin
Tunica Adventitia - Outer layer, mainly collagen rich CT to give strength to vessel wall & anchor to surrounding structuers.
Thick = larger vessels needs their own bloody supply +/- their own lymphatics & nerves = known as Vasa vasorum.
Outer surface also has mesothelium
i. Artery
ii. A = Tunica media, B = Tunica adventitia
iii. A = smooth muscle, B = dense CT -collage
Arteries have Internal and external elastic lamina
How does the structure of Tunica Media differs between elastic and muscular type arteries?
Elastic arteries - Major arteries immediately leaving heart e.g. aorta, carotid & pulmonary arteries
When heart pumps, blood rush into these arteries so they must be able to expand to accept this pressure + able to recoil during diastole to maintain pressure
Have very broad tunica media
Many layers of elastic tissues known as lamina or fenestrations
2 specific layers of elastic tissues - internal & external elastic laminae
Some smooth muscle cells present to maintain elastic tissue
All ageing arteries loose elastic tissue > increase resistance & BP
Muscular arteries - e.g femoral & coronary arteries
Medium size compared to elastic arteries
Lots of smooth muscle in the tunica media (~40 layers) - for vasoconstriction & dilation
Don’t have many layers of elastic laminae, only internal & external lamina (defined border)
Tunia adventitia may be much thicker than tunica media
What vessel is seen in this histology slide?
Arterioles are small arteries with small lumen
Regulate delivery of blood into capillaries
1-3 layers of smooth muscle in the tunica media.
Vasoconstriction and vasodilation controls rate of blood flow into capillaries
Larger arterioles contain an internal elastic lamina, there is no external elastic lamina
Capillaries
Small vessels, connects arterioles to venules
Lacks the 3 layers - only have single layer of endothelial cells (one part of tunica intima). No tunica media / externa
One cell layers > allows molecular exchange
Have supportive pericytes - repair capillaries
What are the 3 types of capillaries?
Continuous
Have no pores or gaps between endothelial cells, because they adhere together via tight junctions
Sat upon a complete basement membrane.
The endothelial cells contain pinocytic vesicles - collect substances from one side of the endothelial cell (e.g. blood) and deliver it to the other side (e.g. tissues).
Fenestrated
Have pores (fenestrae) between endothelial cells - allow substances to diffuse between the blood and tissues
Have Complete basement membrane
Located in areas which require exchange of large quantities of substances e.g intestines, kidneys, pancreas and endocrine glands
Sinusoid (discontinuous)
Have large gaps within the wall & a large diameter.
Make them more permeable to larger macromolecules
The basement membrane is also discontinuous. These capillaries allow direct contact of the blood with tissues and exchange of large macromolecules.
Found in specific organs including the liver, spleen and bone marrow.
Left curly one is a vein
Venules & veins have smaller tunica media = have lesser muscular & elastic contents > lumen prone to collapse
As their size increases, size of tunica externa increases
Small to large veins have valves made of endothelial folds & fibroelastic CT - prevent backflow & ensure unidirectional
During infection, WBCs can leave the blood through small post capillary venules.
The largest vein - vena cava - has thick adventitia layer (for protection) + internal elastic lamina
What type of endothelium does the lymph vessels have?
Lymph vessels are thin & close ended
Have fenestrated endothelium
They collect tissue fluids (lymph) and return it to blood
Similar to vein - have valves & 3 layers (much thinner & less developed adventitia)
What happens to the elastic tissue of the blood vessel as one age? Name some diseases which can accelerate this process
Ageing > loss of elastic tissue within blood vessel walls. In contrast, the amount of collagen increases.
Diseases can accelerate this process, e.g arteriosclerosis, atherosclerosis, Marfan’s syndrome, and Ehlers-Danlos syndrome.
In these conditions, elastin fibres are replaced by collagen.
Marfan’s syndome
Genetic condition caused by mutation in fibrillin gene > reduced functional elastin fibres > reduced elastic recoil of vessels (mainly aorta)
This lead to increase luminal diameters, wall weaknening > aneurysm & dissection or rupture
What happens during Arteriosclerosis vs Atherosclerosis ?
Arteriosclerosis
Process of stiffening of arterial wall - increase in size of tunica intima (intimal proliferation - IP)
Normally occurs with age but can be due to atherosclerotic plaque
Atherosclerosis
Inflammatory response - Starts with thickening of intima
Damage due to DM, HTN, smoking
Myointimal cells, SM, macrophages infiltrated with cholesterol (foam cells)
Fatty streak > develops atherosclerotic plaque / atheroma > narrowing
Occurs in CA > CAD > angina > MI due to reduced blood flow to myocytes due to narrowing of the lumen > reduce radius (flow is proportional to radius4).
Unstable plaque > blood clot > embolism
Zuletzt geändertvor 3 Tagen